Tempering Systems
Tempering systems for tempering GRP and CFRP materials in different performance levels.
Description
GRP and CFRP materials must be tempered to obtain the optimum material properties.
Our fan heaters in conjunction with our control regulates in a very precise way, so that a consistent heat is guaranteed.
The system is easy to set up, mobile, robust and proven in practice.
Models
Tempering Controls
The temperature control units can be designed with a higher output and for several fan heaters if you wish to purchase additional fan heaters at a later date.
The controllers up to 3 kW have a PID controller and are permanently connected to the corresponding tempered-air fan.
From 12 kW , these are further programmable (with tempering curves, time periods, etc.) and can be plugged in via device plug.
- ES TSP12 / 90
- ES-TSP12 / 120
- ES TSP20 / 90
- ES-TSP20 / 120
- ES TSP40 / 90
- ES-TSP40 / 120
Tempering Fan Heaters
Small devices (e.g. for repairs)
- ES-TH6 / 90
- ES-TH6 / 120
Large tempering fan heaters
- ES TH9 / 90
- ES-TH9 / 120
- ES-TH12 / 90
- ES-TH12 / 120
Type designation
Tempering Controls, e.g. ES-TSP20 / 120:
- TS = model name (temper system)
- P = 120 °C version
- 20 = heating power in kW
- 120 = max. temperature range in °C
Tempering Fan Heaters, e.g. ES-TH9 / 90:
- TH = model name (temper heater)
- 9 = heating capacity in kW
- 90 = max. Temperature range in °C
- Standard temperature range: up to 90 °C
- Optional special version: up to 120 °C
Characteristics
- VA case with rubber feet and handles, robust, stable and mobile
- Energy-saving re-circulation mode
- Low blow-out temperature
- High air volume for uniformity
- Special finned radiator, "non-glowing" against fire hazard
- Integrated safety limiter
- Heating power 6-12 kW
- Chamber volume per fan heating max. 25 m³
- Heat resistant connection cable (10 m)